• Six Models
• Two Sizes
• Polarized or Non polarized
• Aluminum Housing
• AC or DC Power Supplies

Jodon’s standard series of cylindrical head laser systems were designed for both industrial and general purpose use. Each model consists of a hard seal laser tube mounted in a drawn aluminum tube, and connected to a separate power supply enclosure with a 72 inch long cable. The power supply connection is a metal, positive locking BNC type connection, which provides an extra measure of safety over the non locking two prong plastic connectors used by other manufacturers.

The laser plasma tube is manufactured using state of the art technology incorporating high temperature bake-out, ultra pure cathodes, and direct glazing (hard sealing) of the mirrors to the resonator tube. The laser tube is then mounted in the aluminum housing using a technique that ensures resistance to mechanical shock. The ballast resistors located in the laser head are fully encapsulated for protection against internal arcing, and against electrical shock.

Each laser head is equipped with an easy to operate beam shutter control. It is operated circumferentially yet does not extend the cylindrical perimeter of the housing. There are no protruding screws, bolts or levers extending beyond the surface of the cylindrical housing.

A nose bezel that incorporates a 1″-32TPI internal thread and a 1 inch square pattern of (4) 4-40 tapped holes, is available as an extra option. this option makes JODON lasers fully compatible with all industry standards.

The power supplies for all models of the SH series are of the DC switcher type, providing up to 84% wall plug efficiency. The power supply electronics are encapsulated for protection against moisture and particulate contamination; and to provide maximum against high voltage arcing, and electric shock. the encapsulated module is mounted in a rugged ABS plastic enclosure with rubber mounting feet. The emission indicator, HV connector, and On/Off switch are located on the front panel of the power supply. The line cord and fuse holder are on the rear panel.

JODON can also provide a NEMA 12 style enclosure for heavy duty industrial applications, or custom enclosures tailored to suit individual requirements.

TECHNICAL SPECIFICATIONS

	HN05SH	HN05SHP	HN1SH	HN1SHP	HN2SH	HN2SHP
Beam power@633nm (TEM00, mW)	0.5	0.5	1.0	1.0	2.0	2.0
Beam dia 1/e2 (mW)	0.65	0.75	0.8	0.75	0.8	0.75
Beam divergence (mr)	1.25	1.1	1.0	1.1	1.0	1.1
Mode Spacing, MHz	670	605	570	605	570	605
Polarization	random	500:1	random	500:1	random	500:1
Warranty power (mW)	0.5	0.5	1.0	1.0	2.0	1.6

Maximum power (mW)	1.0	1.0	5.0	5.0	5.0	5.0
FDA/CDRH Class	II	II	IIIa	IIIa	IIIa	IIIa
Jodon part number	1474	1475	1476	1477	1478	1479

Noise, 30Hz - 10MHz: <1%RMS
Long term stability: ±5%
Time to 80% rated power: 15 s
Warm up time: 20 minutes
Beam/Head concentricity:0.25mm
Beam/Head alignment: 0.1mr
Beam pointing stability, long term: 0.03mr
Storage temperature: -40° C to +80° C (-40° f to +175° C)
Operating temperature: -20° C to +65° C (-5° F to +150° F)
Relative humidity: up to 90%
Input power, 50/60 Hz 115VAC, 230VAC, 12-14VDC
Head weight: 318.9g (11.25oz)
Head dimensions: 50.8×343mm (2.000 dia x 13.5 inch long)
Power supply dimensions: 203×159x64mm (8W x 6.25D x 2.5 inch H)
Power supply weight: 1.2kg (2.5lb)